75 questions
Mobile crane
One written exam for boom truck, lattice boom and telescopic boom.
Mobile crane practice testFree, no sign-up
25 mobile crane questions on setup, operations, power lines, inspections and the OSHA and ASME rules behind them. Pick an answer to see if you are right and why. Your score is at the bottom.
75 questions
One written exam for boom truck, lattice boom and telescopic boom.
Mobile crane practice test75 questions
Its own written exam, including self-erecting tower cranes.
Tower crane practice test75 questions
Its own written exam for overhead crane operators.
Overhead crane practice test110 questions
One OECP certification for signaling and rigging together.
Signal person rigger practice testNo calculator
Load weight, sling tension and parts of line, worked by hand.
Load calculations practice test50 questions
Refresher for the 50-question recertification written.
Recertification practice testOriginal practice questions from the Crane Exam Prep question bank. They are not actual OECP exam questions.
Answer: C. The swing radius of the rotating superstructure's rear. The rotating rear can crush a worker — barricade its swing radius.
Answer: B. Decreases. Each layer increases the effective drum diameter, reducing line pull.
Answer: B. At least one in the cab and at least two on the outside. At least one electrocution hazard warning must be conspicuously posted in the cab in view of the operator, plus at least two on the outside of the equipment.
Answer: D. A prevention system — two-block warning-only devices are not allowed. Personnel hoisting requires an anti-two-block device that prevents two-blocking; warning-only devices are not permitted.
Answer: D. Automatically stops the boom from hoisting at maximum boom angle. The boom hoist limit switch automatically stops the boom from hoisting up at maximum boom angle on lattice boom cranes.
Answer: A. By using actual measurement. The shift inspection checks installation and calibration of safety devices and operator aids using actual measurement.
Answer: A. A certified welder familiar with the weld grades, types and material specified in the platform design. 1926.1431(e)(5) requires a certified welder familiar with the weld grades, types, and materials specified in the platform design.
Answer: C. Devices such as anti-two-block systems and load moment indicators that assist the operator but do not replace operating judgment. B30.5 treats devices like anti-two-block, LMI/RCL, and boom angle indicators as operational aids, with specified actions when they are inoperative.
Answer: C. 5 degrees. List and trim must not exceed the least of 5 degrees, the amount the crane manufacturer specifies, or the amount a qualified person specifies.
Answer: B. If the manufacturer fails to start review within 30 days or finish within 120 days. If the manufacturer no longer exists, does not acknowledge the request, fails to start review in 30 days, or fails to finish within 120 days, an RPE may approve the modification.
Answer: B. compaction of approach roads. Approach roads must be adequately compacted to support the crane traveling to the setup location.
Answer: D. Disengaging boom hoist power when the boom reaches a predetermined angle and holding it from lowering. The device disengages boom hoist power at a predetermined operating angle and sets brakes or closes valves so the boom cannot lower once power is disengaged.
Answer: B. The U.S. Army Corps of Engineers. EM 385-1-1 is the U.S. Army Corps of Engineers general safety requirements manual, and it governs work on Corps projects — often with requirements stricter than OSHA.
Answer: C. prohibited, because booms are designed for vertical loads. Booms are engineered for vertical loading; side loads can buckle the boom and are prohibited.
Answer: A. De-energized and visibly grounded at the worksite. Option 1 is to de-energize AND ground the lines visibly at the worksite; Options 2 and 3 rely on clearance distances plus additional protective measures.
Answer: A. By measuring the boom angle with a protractor or digital level. A boom angle indicator is checked with a protractor or digital level; a radius indicator is checked by taping the radius.
Answer: C. Torsion on the boom and excessive wear to components. Eccentric reeving causes torsion on the boom and excessive wear to components.
Answer: D. An insulating link/device installed at a point between the end of the load line (or below) and the load. 1926.1408(b)(4) lists a proximity alarm, dedicated spotter, range control warning device, range-limiting device, or an insulating link/device between the load line and load.
Answer: B. Lifting it a few inches and applying the brakes. Para 5-3.2.1.5(g) requires testing the brakes by raising the near-rated load a few inches and applying the brakes.
Answer: C. 6 strands in the rope, 25 wires in each strand. The first numeral is the number of strands (6); the second is the number of wires in each strand (25); Filler is the wire pattern.
Answer: B. the operator's cab rotates with the boom on the rotating superstructure. On a swing (rotating) cab crane the operator's station is mounted on the upperworks and rotates together with the boom, unlike a fixed-cab carrier station.
Answer: A. The employer that has authority at the site to make or arrange them. If there is no controlling entity, the ground-preparation duty falls to the employer with authority at the site to make or arrange those preparations.
Answer: B. A drop of 1 ft over 100 ft of horizontal length (12 in. over 1,200 in.). Percentage of grade is a ratio of drop to horizontal run. Most standards allow a maximum of 1% out of level, though some cranes must be within 1/2% to hold their chart numbers.
Answer: A. 1/2 of 1 percent of grade. One percent is the general limit, but the manufacturer's criteria always govern, and some machines are rated only within one half of one percent of level.
Answer: A. A rope attached to the load and handled by ground personnel to control the load's rotation and swing. Tag lines give riggers control of a suspended load's orientation without placing hands on the load, helping prevent uncontrolled spinning or swinging.
Your result
The real exam
OECP is open only to IUOE members in good standing. You pass a written exam first, then a hands-on practical for each crane type you want on your card. The card is good for five years.
OECP does not supply study material or run training. It points candidates to their local's training site and to the references listed in the candidate manual.
Full OECP certification guide on Crane Exam Prep| Mobile, tower and overhead | 75 multiple-choice questions each, 2 hours |
|---|---|
| Signal Person Rigger | 110 multiple-choice questions, 2 hours |
| Passing score | Scaled score of 500 on a 200 to 800 scale |
| Calculators | Not allowed |
| Recertification | 50 questions for each crane type, every 5 years |
Sources: OECP Crane Operator Candidate Manual, OECP Signal Person Rigger Candidate Manual and OECP FAQ. Checked November 2026.
FAQ
The app has 5,000+ questions and re-tests the ones you miss. Free to start.