1. Home
  2. IUOE aptitude test

Apprenticeship entrance test

IUOE aptitude test

There is no single IUOE aptitude test. Each local's apprenticeship committee chooses its own entrance test, and only some of them publish the details. This page collects what five locals say, in their own figures.

The short answer

Expect basic math, reading and mechanical reasoning. Local 12 publishes the clearest outline: 100 multiple-choice questions, with 35 on reading, 20 on math and 45 on mechanical reasoning, and a 70% pass mark. You are not tested on running equipment. Your score matters beyond passing: Local 12 ranks everyone who passes by score and calls the highest first.

Checked November 2026 against the Operating Engineers Training Trust (Local 12) entrance examination page, the Operating Engineers Training Trust (Local 12) FAQ, the IUOE Local 150 apprenticeship FAQ, the Western Pennsylvania Operating Engineers (Local 66) sample tests page, the Minnesota Department of Labor and Industry and the Local 3 Northern California apprenticeship application (2016 revision).

What five locals publish about their tests

If your local is not here, call its apprenticeship office and ask what the test covers and whether there is a sample.

Operating engineers entrance tests by local
LocalWhat it says about the test
Local 12, Southern CaliforniaA written entrance examination of 100 multiple-choice questions: 35 on reading basic written English, 20 on basic math and 45 on physical forces and mechanical elements. 70 points passes. Calculators are permitted, but not a phone. It publishes a study guide and a sample exam
Local 150, IllinoisOperator applicants are called to schedule an aptitude test once their application is active. The test is followed by an evaluation with classroom and hands-on exercises and an oral interview. Its FAQ does not say what the test covers
Local 66, western PennsylvaniaA selection test with mechanical, mathematical and problem-solving questions, and you need a passing score. It publishes sample tests for operators and mechanics and lists test prep classes
Local 49, MinnesotaApplicants pass an entrance exam and show a diploma or GED and a driver's license. They then get a letter of eligibility and a list of signatory contractors to apply to
Local 3, Northern CaliforniaIts application says applicants take a computer-based skills assessment as part of the process. That wording is from the 2016 application, so confirm the current format with the apprenticeship office

Sources: Operating Engineers Training Trust (Local 12) entrance examination page, IUOE Local 150 apprenticeship FAQ, Western Pennsylvania Operating Engineers (Local 66) sample tests page, Minnesota Department of Labor and Industry and Local 3 Northern California apprenticeship application (2016 revision).

The Local 12 entrance exam in detail

Local 12's training trust publishes the most complete description of any local we checked, so it is the best public picture of what these tests look like.

Operating Engineers Training Trust entrance examination
Questions100 multiple choice, one point each
Reading35 questions on reading and understanding basic written English
Math20 questions of basic math
Mechanical45 questions on physical forces and mechanical elements in practical situations
TimeThe exam page gives 75 minutes. The trust's FAQ says one hour, so plan for the shorter one
Passing score70 points
Bonus pointsIts FAQ gives 10 points for a valid Class A commercial driver's license and 10 for qualifying veterans, added after you pass
CalculatorsPermitted. A cell phone cannot be used as one
Not testedKnowledge of operating engineer work. No experience is needed
RetakesOnly in a later application period, after you are off the accepted applicants list

Sources: Operating Engineers Training Trust (Local 12) entrance examination page and Operating Engineers Training Trust (Local 12) FAQ.

The trust ranks everyone who passes by score, and contractors' need for operators decides how far down the list it calls. A higher score moves you up the list.

Free OECP practice test

25 questions, no sign-up, every answer explained.

Start now

What to study

Local 12's page names the math to review, and it is a fair guide for any local:

  • Addition, subtraction, multiplication and division
  • Fractions, decimals and percentages
  • Measuring length, area and volume
  • Basic English grammar and vocabulary, for the reading section

Local 66 points applicants to a prep class that covers reading a ruler, fractions, decimals and unit conversions.

Mechanical reasoning questions of this kind usually show a simple setup, such as gears, a lever or a pulley, and ask what happens next. The way to prepare is to work a published sample. Local 12 and Local 66 both post one.

The level of math, in five examples

We wrote these to show the level. They are not questions from any local's test.

  • Fractions. 3/4 + 5/8. Change 3/4 to 6/8, add 5/8, and you get 11/8, which is 1 3/8.
  • Percent. 15% of 240. Multiply 240 by 0.15 to get 36.
  • Area. A slab 12 feet by 9 feet covers 12 x 9 = 108 square feet.
  • Volume. A trench 30 feet long, 2 feet wide and 3 feet deep holds 30 x 2 x 3 = 180 cubic feet. Divide by 27 and that is about 6.7 cubic yards.
  • Units. 54 inches divided by 12 is 4.5 feet.

If any of those slowed you down, that is the topic to practice first.

What this site does and does not cover

We should be straight about this. The Crane Exam Prep app does not teach the apprenticeship aptitude test. It is built for the certification exams that come later, once you are a member working toward a crane card.

If that is where you are headed, it is worth seeing now what those exams ask. The OECP crane written is 75 questions in two hours with no calculator, and the load chart math on it is the same arithmetic as above, done under pressure. Try the free OECP practice test.

FAQ

IUOE aptitude test questions

Is there a national IUOE aptitude test?
No. Each local's apprenticeship committee picks its own entrance test. The subjects are similar from local to local, mostly math, reading and mechanical reasoning, but the format and pass mark differ.
What is on the operating engineers aptitude test?
Local 12 lists 35 reading questions, 20 math questions and 45 mechanical questions. Local 66 describes mechanical, mathematical and problem-solving questions. Other locals publish less, so ask your apprenticeship office.
What score do I need?
It varies. Local 12 requires 70 out of 100. Passing is only the first hurdle, because Local 12 ranks applicants by score and calls the highest first.
Is the operating engineers math test hard?
The published outlines describe basic math: fractions, decimals, percentages and measuring length, area and volume. If it has been a while since school, practice with a pencil before the test.
Can I use a calculator on the aptitude test?
At Local 12, yes, though a phone cannot be used as one. Other locals may differ. This is different from the OECP certification exams, where calculators are not allowed.
What is on the Local 150 aptitude test?
Local 150's FAQ says operator applicants are called to schedule an aptitude test once their application is active, followed by an evaluation and an oral interview. It does not publish what the test covers.
What is on the Local 3 aptitude test?
Local 3's Northern California application describes a computer-based skills assessment. That description is from a 2016 application form, so check the current format with the apprenticeship office.
Can I retake the test if I fail?
Rules differ. At Local 12 you wait for the next application period and are ranked by the newer score.

Keep going

One free practice test shows you where you stand.

25 questions. No sign-up. Every answer explained.

Start the free practice test
Free OECP practice test25 questions, no sign-up
Start now