Guide
IUOE aptitude test
What operating engineers locals test before the apprenticeship.
IUOE aptitude testIUOE apprenticeship
An operating engineers apprenticeship is paid training in running and maintaining heavy equipment, run by an IUOE local and its contractors. Each local writes its own program, so this page uses the figures three locals publish.
The short answer
Most programs run about four years and 6,000 hours on the job, plus classroom and field training. Typical entry rules are age 18, a diploma or GED, a driver's license, a drug test and an entrance test. Pay starts at 50% to 60% of the journey-level rate at the two locals that publish a figure, and rises as you log hours.
Checked November 2026 against IUOE Local 150, the Operating Engineers Training Trust for Local 12, Local 49, the Minnesota Department of Labor and Industry and Local 66.
Length, entry rules and starting pay, from each local's own pages.
| Local | Length and hours | To get in | Starting pay |
|---|---|---|---|
| Local 150, Illinois | Heavy equipment operator program of 4 or more years: 6,000 or more hours on the job, 240 or more classroom hours and 192 or more hours of field instruction | At least 18, diploma or GED, live in the local's territory, valid driver's license, drug test, $25 application fee, then an aptitude test and an evaluation | First-year apprentices typically start at 50% of the journeyperson scale |
| Local 12, Southern California | 6,000 hours on the job plus six semesters of classroom instruction, about two or three Saturdays a month. Most finish in three to four years | 17 and a half to apply and 18 to start, entrance exam score of 70% or better, substance abuse test. No experience required | 60% of the journeyperson wage |
| Local 49, Minnesota | 6,000 hours on the job plus 432 hours of related training, 144 hours for every 2,000 hours worked | Entrance exam, diploma or GED and a driver's license. Then you are hired by a signatory contractor before you enter the program | Not stated on the pages checked |
Sources: IUOE Local 150 apprenticeship FAQ, Operating Engineers Training Trust (Local 12) FAQ, IUOE Local 49 Training Center and the Minnesota Department of Labor and Industry. Each local sets its own program, and these figures can change.
25 questions, no sign-up, every answer explained.
The apprenticeship makes you an operating engineer. Cranes are one of the things an operating engineer can run, alongside excavators, dozers, loaders and graders, and the crane seat usually comes after time on other machines.
Crane work adds a certification on top. The union's own card, OECP, needs 1,000 documented hours of crane-related experience or training in the past five years, a medical card, a drug test, a 75-question written and a practical for each crane type. OECP certification requirements.
You can start on the written material as an apprentice. Free OECP practice test.
Training does not stop at journey level. Local 150 describes its program as training for both apprentices and journey workers, and the IUOE runs classes at local training centers and at its International Training and Education Center.
For crane operators, the training center is also where certification happens. OECP holds written exams at IUOE local training sites and sends candidates to those sites for refresher classes before an exam.
So if you are already a member and searching for operating engineers training, the first call is to your local's training site. Ask what crane and rigging classes are on the calendar and when the next OECP written is scheduled.
FAQ
Guide
What operating engineers locals test before the apprenticeship.
IUOE aptitude testGuide
The route from applicant to an OECP card, step by step.
Union crane operatorGuide
Who can test, what to hand in, the exams, the fees and renewal.
OECP certification25 questions. No sign-up. Every answer explained.