Guide
Operating engineers apprenticeship
Hours, requirements, the entrance test and pay at three IUOE locals.
Operating engineers apprenticeshipUnion crane operator
Union crane operators in construction belong to the International Union of Operating Engineers. You get in through a local's apprenticeship, build hours on equipment, and certify once you have the crane time. Here is the route, with the numbers three locals publish.
The short answer
Apply to the apprenticeship run by your IUOE local. Programs run about four years with around 6,000 paid hours on the job. To hold the union's own crane card, OECP, you need 1,000 documented hours of crane-related experience or training, then a 75-question written and a practical. You are paid from the first day of work.
Checked November 2026 against IUOE Local 150, the Operating Engineers Training Trust for Local 12, Local 49, the OECP Crane Operator Candidate Manual and BLS, The Economics Daily.
There is no single national program. These are three locals' own figures, to show the range.
| Local | Length and hours | To get in | Starting pay |
|---|---|---|---|
| Local 150, Illinois | Heavy equipment operator program of 4 or more years: 6,000 or more hours on the job, 240 or more classroom hours and 192 or more hours of field instruction | At least 18, diploma or GED, live in the local's territory, valid driver's license, drug test, $25 application fee, then an aptitude test and an evaluation | First-year apprentices typically start at 50% of the journeyperson scale |
| Local 12, Southern California | 6,000 hours on the job plus six semesters of classroom instruction, about two or three Saturdays a month. Most finish in three to four years | 17 and a half to apply and 18 to start, entrance exam score of 70% or better, substance abuse test. No experience required | 60% of the journeyperson wage |
| Local 49, Minnesota | 6,000 hours on the job plus 432 hours of related training, 144 hours for every 2,000 hours worked | Entrance exam, diploma or GED and a driver's license. Then you are hired by a signatory contractor before you enter the program | Not stated on the pages checked |
Sources: IUOE Local 150 apprenticeship FAQ, Operating Engineers Training Trust (Local 12) FAQ, IUOE Local 49 Training Center and the Minnesota Department of Labor and Industry. Each local sets its own program, and these figures can change.
25 questions, no sign-up, every answer explained.
OSHA requires a certified operator on most construction cranes, union or not. For an IUOE member there are two accredited routes, and plenty of operators hold both cards.
Ask your coordinator which card your local expects and when. OECP vs NCCCO compared.
Either way the written exam is the same body of knowledge: setup, power lines, signals, rigging, the OSHA crane rule and load charts. You can start on it long before you have the hours. Free OECP practice test.
There is no national union wage. Each local negotiates its own agreements, and each agreement has a wage sheet. Cranes sit near the top of those sheets, and some agreements pay more as the boom gets longer.
The government's broadest comparison covers all construction trades, not crane operators alone. In 2024, workers in construction and extraction occupations who were represented by a union had median weekly earnings of $1,475. Non-union workers in the same occupations had $974. BLS cautions that broad comparisons like this do not control for other things that affect pay, such as occupation, age and region.
Apprentices earn a share of the journey-level rate that rises as they complete hours. Local 150 says its first-year apprentices typically start at 50%. Local 12 starts apprentices at 60%.
Sister site Crane Exam Prep has real 2026 wage sheets for union crane operators and IUOE locals by state.
Source for the earnings comparison: BLS, The Economics Daily, 2024 annual averages for full-time wage and salary workers.
| Union route | Open-shop route | |
|---|---|---|
| Training | A paid apprenticeship through the local's training center | A crane school you pay for, or training from an employer |
| Time to the crane seat | Longer. You come up through the program on other equipment | Shorter. A school can have you testing in weeks |
| Certification | OECP, CCO or both | CCO. OECP is closed to non-members |
| Hours before you can test | 1,000 documented hours for OECP | No hours requirement for CCO operator exams |
| Pay | The rate in the local's agreement, with health and pension contributions | Whatever each employer pays |
FAQ
Guide
Hours, requirements, the entrance test and pay at three IUOE locals.
Operating engineers apprenticeshipGuide
What operating engineers locals test before the apprenticeship.
IUOE aptitude testGuide
Who can test, what to hand in, the exams, the fees and renewal.
OECP certification25 questions. No sign-up. Every answer explained.