1. Home
  2. Crane operator requirements

OSHA operator rule

Crane operator requirements: what OSHA requires

On a construction site, OSHA sets three requirements for a crane operator, and a card is only one of them. This page covers the rule, the trainee exception, and where an OECP card fits.

The short answer

Under 29 CFR 1926.1427, an employer must make sure each crane operator is trained, certified or licensed, and evaluated before operating. Certification from an accredited testing organization is by crane type, or type and capacity, and is valid for five years. The employer must provide it at no cost to the employee. A card alone does not make an operator qualified without the employer's evaluation.

Checked November 2026 against the text of 29 CFR 1926.1427, the OECP Crane Operator Candidate Manual and the BLS Occupational Outlook Handbook, Material Moving Machine Operators.

The three requirements

What 29 CFR 1926.1427 asks for
RequirementWhat it meansWho does it
TrainingInstruction in the knowledge and skills the rule lists, with retraining when performance shows the needThe employer
Certification or licenseA card from an accredited testing organization, an audited employer program, or a state or local license where one is requiredA testing organization, or the licensing office
EvaluationA check that the operator has the skills, knowledge and judgment for the specific equipment and the work, including its safety devices, software, size and configurationThe employer, through a person with the knowledge, training and experience to assess operators

Source: 29 CFR 1926.1427. The certification requirement took effect December 10, 2018. The evaluation and documentation requirements took effect February 7, 2019.

7 practice questions on operator requirements

Pick an answer to see whether you are right and why. These are original practice questions from the Crane Exam Prep question bank, not actual exam questions.

  1. OSHA 1926 Subpart CC

    1. According to OSHA 1926.1427(f), after a successful evaluation the employer may allow the operator to operate other equipment when:

    Show answer

    Answer: B. The employer can demonstrate it does not require substantially different skills, knowledge, or ability to recognize and avert risk. 1926.1427(f)(5) permits operation of other equipment that the employer can demonstrate does not require substantially different skills, knowledge, or risk-recognition ability.

  2. Standards

    2. The employer's documented evaluation of an operator under 1926.1427 must confirm the operator can…

    Show answer

    Answer: B. Safely operate that type of equipment for the assigned work. The employer evaluation verifies the operator's ability to safely run the specific equipment and configuration; certification alone is not enough.

  3. ASME B30.5 (Mobile Cranes)

    3. According to ASME B30.5, operator physical examinations shall be required every:

    Show answer

    Answer: A. 3 years, or more frequently if supervision deems it necessary. Para 5-3.1.2.1(f) requires operator physical examinations every 3 yr, or more frequently if supervision deems it necessary.

  4. OSHA 1926 Subpart CC

    4. According to OSHA 1926.1427, certification from an accredited testing organization must be based on written and practical tests that provide certification based on:

    Show answer

    Answer: A. Equipment type, or type and capacity. 1926.1427(d)(1)(ii)(B) requires certification based on equipment type, or type and capacity.

  5. Standards

    5. Under OSHA 1926.1427, how often must a certified crane operator recertify?

    Show answer

    Answer: D. Every 5 years. OSHA requires written and practical recertification every 5 years, while ASME B30.5 additionally calls for a physical examination every 3 years as industry practice.

  6. OSHA 1926 Subpart CC

    6. According to OSHA 1926.1427, for purposes of compliance, a state or local government operator license is valid for the period stipulated by the licensing office but no longer than:

    Show answer

    Answer: D. 5 years. 1926.1427(c)(1)(v) caps license validity at 5 years for compliance purposes.

  7. OSHA 1926 Subpart CC

    7. According to OSHA 1926.1427, a certification issued by an accredited crane operator testing organization is valid for:

    Show answer

    Answer: D. 5 years. 1926.1427(d)(4) makes certification under the accredited testing organization option valid for 5 years, and it is portable among employers.

Free OECP practice test

25 questions, no sign-up, every answer explained.

Start now

The certification rules

Certification under 1926.1427
Who can certifyA testing organization accredited by a nationally recognized accrediting agency
Certified forA type of equipment, or a type and capacity
Portable?Yes, between employers who use this option
Valid forFive years
Who paysThe employer must provide required certification or licensing at no cost to employees
Written testControls and performance, calculating load and capacity, preventing power line contact, ground conditions, the rule itself, and finding information in the manual
Practical testRecognizing shift inspection items, operating and maneuvering skills, applying load chart information and safe shutdown
State or local licenseCounts where the license meets the rule's testing standards. Valid for the licensor's period, up to five years

Source: 29 CFR 1926.1427.

OECP is one accredited route. Its crane operator programs are accredited by the National Commission for Certifying Agencies, and its cards last five years. OECP certification. The other common card is CCO. OECP and NCCCO compared.

The employer evaluation

What the evaluation record must show
Record contentsThe operator's name, the evaluator's name and signature, the date, and the make, model and configuration of the equipment
Where it is keptAvailable at the worksite while the operator is employed
Other equipmentThe operator may run other equipment the employer can show does not need substantially different skills, knowledge or judgment
Card aloneHolding a certification does not by itself establish that the operator is qualified

Source: 29 CFR 1926.1427, paragraph (f).

Operators in training

Someone who is not yet certified may run a crane only as an operator-in-training, watched continuously by a trainer. The rule bars a trainee from:

  • Operating where the equipment or load could get within 20 feet of a power line of up to 350 kV, or 50 feet of one over 350 kV
  • Hoisting personnel
  • Lifts using more than one crane
  • Operating over a shaft, cofferdam or tank farm
  • Multiple-lift rigging, unless the trainer decides the trainee's skills are sufficient

The trainer may step away for a break of no more than 15 minutes, no more than once an hour.

Requirements beyond the federal rule

  • Exceptions. Operators of derricks, sideboom cranes and equipment rated at 2,000 pounds or less do not need certification under this section. They must still be trained.
  • State and city licenses. The Bureau of Labor Statistics notes that some states and cities require crane operators to be licensed.
  • Experience. BLS says crane and tower operators typically have several years of experience on other equipment or as riggers and signalers first.
  • Certifier rules. OECP adds its own: IUOE membership, 1,000 documented hours, a medical card and a drug test. OECP eligibility.

FAQ

Crane operator requirement questions

Does OSHA require crane operators to be certified?
Yes, on construction sites. 29 CFR 1926.1427 requires operators to be trained, certified or licensed, and evaluated by their employer before operating. Derricks, sideboom cranes and equipment rated at 2,000 pounds or less are excepted from certification.
How long is a crane operator certification good for?
Five years under OSHA's rule. OECP and CCO cards both last five years.
Who pays for crane operator certification?
OSHA requires the employer to provide certification or licensing required by the rule at no cost to employees.
Is a certification card enough to operate a crane?
No. The employer must also evaluate the operator on the specific equipment and document it. The rule says a certification alone does not establish qualification.
Can I run a crane before I am certified?
Only as an operator-in-training under continuous monitoring by a trainer, and not for certain work such as hoisting personnel, multiple-crane lifts or work near power lines.
Are these real exam questions?
No. They are original practice questions written from the OSHA rules and ASME B30 standards that crane exams draw on. OECP does not release its questions, and this site is not affiliated with OECP or the IUOE.

Keep going

One free practice test shows you where you stand.

25 questions. No sign-up. Every answer explained.

Start the free practice test
More practice questionsFree account, no card
Open the app