Guide
What is an operating engineer?
What the job is, what they run and how it differs from a stationary engineer.
What is an operating engineer?The union
The IUOE is the union behind the operating engineers apprenticeships and the OECP crane card. Here is what it is, who it represents, and how to find the local that covers you.
The short answer
The International Union of Operating Engineers was founded in 1896 and says it has over 400,000 members in 123 local unions across the United States and Canada. It represents operating engineers, who run and maintain heavy construction equipment, and stationary engineers, who run building and plant systems. You join through a local, usually by apprenticeship.
Checked November 2026 against the IUOE union FAQs, the IUOE local directory and the IUOE page on OECP.
| Full name | International Union of Operating Engineers |
|---|---|
| Founded | 1896, as the National Union of Steam Engineers |
| Members | Over 400,000 |
| Locals | 123, in the United States and Canada |
| Standing | The tenth largest union in the AFL-CIO, by its own description |
| Operating engineers | Heavy equipment operators, mechanics and surveyors in the construction industry |
| Stationary engineers | Operations and maintenance in building and industrial complexes and in the service industries |
| Training | An International Training and Education Center, plus over 100 local training and apprenticeship programs |
Source: IUOE union FAQs.
Each local sets its own apprenticeship. These pages collect what each one publishes, with a link to the source for every fact. For any other local, use the IUOE local directory.
| Local | Where | What its sources publish |
|---|---|---|
| Local 3 | Northern California, Northern Nevada, Hawaii, Utah | Branches and hours by region, including a Crane Operator branch |
| Local 4 | Eastern Massachusetts, Eastern New Hampshire, Maine | Four years, 8,000 hours, cranes named in the equipment list |
| Local 12 | Southern California | The entrance exam in detail and the 60% starting rate |
| Local 15 | New York City | 6,000 hours over four years |
| Local 18 | Ohio | Two four-year tracks and the CDL permit rule |
| Local 49 | Minnesota, North Dakota, South Dakota | 6,000 hours and the contractor-hire route |
| Local 66 | Western Pennsylvania and three Ohio counties | Residency rule and the selection test |
| Local 101 | Kansas City, Missouri and Wichita, Kansas | The document list, including OSHA 10 |
| Local 139 | Wisconsin | 6,000 hours in four levels and the Job Skills Test |
| Local 150 | Illinois and Indiana | October applications, the evaluation week and its OECP page |
| Local 302 | Washington, Alaska, Idaho, Montana | The full 2026 pay scale and a crane trade |
| Local 324 | Michigan | Three years and 6,000 hours |
| Local 478 | Connecticut | Application dates, starting pay and the same-day aptitude test |
| Local 825 | New Jersey and five New York counties | The 2026 New York recruitment and its WorkKeys test |
Sources are linked on each local's page.
25 questions, no sign-up, every answer explained.
The IUOE has its own certification body for crane operators, signal persons and riggers: the Operating Engineers Certification Program, OECP. It is open only to IUOE members, and its crane operator programs are accredited by the National Commission for Certifying Agencies.
OECP certification: requirements, exams and fees. Some members hold a CCO card instead or as well. How the two compare.
FAQ
Guide
What the job is, what they run and how it differs from a stationary engineer.
What is an operating engineer?Guide
Apprenticeship hours at 11 locals, side by side, and how to get in.
Union heavy equipment operatorGuide
Who can test, what to hand in, the exams, the fees and renewal.
OECP certification25 questions. No sign-up. Every answer explained.