Guide
IUOE
The operating engineers union: who it represents, its locals and its crane card.
IUOEIUOE Local 3 · Northern California, Northern Nevada, Hawaii and Utah
Local 3 describes itself as the largest construction trades local in the United States, with more than 37,000 members. Each of its regions runs its own apprenticeship intake, so the rules depend on where you live.
The short answer
Local 3 covers Northern California, Northern Nevada, Hawaii and Utah. Its Northern Nevada program lists a Crane Operator branch of 6,000 hours and requires an Industry Entrance Test and an interview. Its Hawaii program lists 6,520 hours for construction equipment operators. California applications run through the local's Northern California apprenticeship committee.
Checked November 2026 against Local 3's About page, its Northern Nevada training page, its Hawaii training page and its 2016 Northern California application. This site is not run by or affiliated with Local 3. Programs change, so confirm with the local before you rely on a date or a number.
| Territory | Northern California, Northern Nevada, Hawaii and Utah |
|---|---|
| Members | More than 37,000, mainly heavy equipment operators, plus public employees |
| Northern Nevada branches | Crane Operator 6,000 hours, Grading and Paving 6,000, Heavy Duty Repairman 8,000, Lubrication Technician 4,000, Survey Technician 4,000 |
| Northern Nevada requirements | At least 18 with proof, high school graduate or GED with transcripts, live in Northern Nevada, a valid Nevada driver's license before you are indentured, a fitness evaluation, the Industry Entrance Test and an oral interview with the apprenticeship committee, and the drug testing policy |
| Hawaii hours | Construction Equipment Operator 6,520 (6,000 on the job plus 520 of related training), Heavy Duty Repairer and Welder 8,520, Paving Equipment Operator 4,440 |
| Hawaii requirements | At least 18, high school graduate or equivalent with a transcript, physically fit, a valid Hawaii driver's license with your current address on the island you apply for, your own transportation, and a pass on both a general knowledge test and a hands-on test |
| Hawaii training site | Kahuku Training Facility on Oahu. New apprentices start with a four-week Probationary Orientation Period there, which the page says is unpaid |
| Northern California | The 2016 application describes a computer-based skills assessment, and says Crane Operator applicants need a California commercial driver's permit by the interview |
Sources: Operating Engineers Local 3, About us, Local 3 Northern Nevada training page, Local 3 Hawaii training page and the Local 3 Northern California apprenticeship application (2016 revision).
25 questions, no sign-up, every answer explained.
We only print what a named source states. On these points the pages we checked were silent, so ask the local:
Local 3 is one of the few locals whose published program names cranes directly: its Northern Nevada page lists Crane Operator as its own 6,000-hour branch.
Whatever local you join, OSHA's operator rule requires crane operators on construction sites to be certified or licensed, and evaluated by their employer. The IUOE's own program is OECP, the Operating Engineers Certification Program. The OECP Crane Operator Candidate Manual opens it to IUOE members in good standing who have 1,000 documented hours of crane-related experience or training, a current medical card and a negative drug test.
OECP certification: requirements, exams and fees. If your training center tests for CCO instead, the subject matter is the same. OECP and NCCCO compared.
FAQ
Guide
The operating engineers union: who it represents, its locals and its crane card.
IUOEGuide
Hours, requirements, the entrance test and pay at three IUOE locals.
Operating engineers apprenticeshipGuide
What operating engineers locals test before the apprenticeship.
IUOE aptitude test25 questions. No sign-up. Every answer explained.