Guide
IUOE
The operating engineers union: who it represents, its locals and its crane card.
IUOEIUOE Local 302 · Washington, Alaska, Idaho and Montana
In Washington, Local 302 trains with Local 612 through the Operating Engineers Regional Training Program in Ellensburg. Crane work is its own trade there: Hoisting Engineer.
The short answer
The Operating Engineers Regional Training Program offers three trades: Heavy Equipment Operator, Hoisting Engineer (Crane) and Heavy Duty Repair Mechanic. Its flyer lists a journey-level rate of $42.23 for 2026, with apprentices starting at 65%. The 2026 application closed on November 6, 2026. The program says the next one opens tentatively in spring 2027.
Checked November 2026 against the program's application page and its flyer. This site is not run by or affiliated with Local 302. Programs change, so confirm with the local before you rely on a date or a number.
| Program | Operating Engineers Regional Training Program, 16921 Vantage Highway, Ellensburg, Washington |
|---|---|
| Trades | Heavy Equipment Operator, Hoisting Engineer (Crane) and Heavy Duty Repair Mechanic |
| Minimum qualifications | At least 18, a diploma or GED, a valid driver's license, reliable transportation, able to pass a CDL physical, and able to read, write and speak English |
| Journey-level rate on the flyer | $40.01 for 2025 and $42.23 for 2026 |
| Apprentice steps | 65% for the first 1,000 hours, then 70%, 75%, 80%, 90% and 95%, one step per 1,000 hours up to 6,000 |
| Application | Online only. The 2026 window closed November 6, 2026. The next is listed as tentatively spring 2027 |
| Documents | Resume, diplomas, one to three letters of recommendation, driver's license, Social Security card, birth certificate or passport, and a DD214 for veterans |
| No diploma? | Two or more years of heavy equipment experience can stand in, with proof and 70% on both a math and a reading assessment |
Sources: Operating Engineers Regional Training Program (Locals 302 and 612) application page and the Operating Engineers Regional Training Program flyer. Office locations are from the IUOE local directory.
25 questions, no sign-up, every answer explained.
We only print what a named source states. On these points the pages we checked were silent, so ask the local:
The Regional Training Program lists Hoisting Engineer (Crane) as one of its three trades, so you choose the crane route when you apply.
Whatever local you join, OSHA's operator rule requires crane operators on construction sites to be certified or licensed, and evaluated by their employer. The IUOE's own program is OECP, the Operating Engineers Certification Program. The OECP Crane Operator Candidate Manual opens it to IUOE members in good standing who have 1,000 documented hours of crane-related experience or training, a current medical card and a negative drug test.
OECP certification: requirements, exams and fees. If your training center tests for CCO instead, the subject matter is the same. OECP and NCCCO compared.
FAQ
Guide
The operating engineers union: who it represents, its locals and its crane card.
IUOEGuide
Hours, requirements, the entrance test and pay at three IUOE locals.
Operating engineers apprenticeshipGuide
What operating engineers locals test before the apprenticeship.
IUOE aptitude test25 questions. No sign-up. Every answer explained.