Guide
IUOE
The operating engineers union: who it represents, its locals and its crane card.
IUOEIUOE Local 4 · Eastern Massachusetts, Eastern New Hampshire and Maine
Local 4 is a hoisting and portable local, and cranes are in its program by name. Its apprenticeship page lists crawler cranes and hydraulic truck cranes among the equipment apprentices train on.
The short answer
Local 4 runs a four-year apprenticeship with training at its centers in Canton and Medway, Massachusetts. A listing for the program describes 8,000 hours on the job and 600 classroom hours, with aptitude testing. Applicants need a valid driver's license and must pass a DOT physical.
Checked November 2026 against Local 4's apprenticeship page and the MIT Job Connector listing for the Local 4 apprenticeship. This site is not run by or affiliated with Local 4. Programs change, so confirm with the local before you rely on a date or a number.
| Territory | Eastern Massachusetts, Eastern New Hampshire and the state of Maine |
|---|---|
| Length | Four years |
| Hours | 8,000 on the job and 600 in the classroom, according to the MIT Job Connector listing |
| Training | At the training center, in the field and in evening classes. Facilities are in Canton and Medway, Massachusetts |
| Equipment named | Includes crawler cranes and hydraulic truck cranes |
| Physical demands | Lift 50 pounds regularly, climb 25 feet and work days of ten hours or more |
| Requirements | A DOT physical and a valid driver's license |
| Selection | Aptitude testing, according to the MIT Job Connector listing |
Sources: IUOE Local 4 apprenticeship page and the MIT Job Connector listing for the Local 4 apprenticeship.
25 questions, no sign-up, every answer explained.
We only print what a named source states. On these points the pages we checked were silent, so ask the local:
Local 4's page names crawler cranes and hydraulic truck cranes among the equipment apprentices train on. The Bureau of Labor Statistics notes that some states and cities require crane operators to be licensed, so ask the training program whether a license applies on top of a certification card.
Whatever local you join, OSHA's operator rule requires crane operators on construction sites to be certified or licensed, and evaluated by their employer. The IUOE's own program is OECP, the Operating Engineers Certification Program. The OECP Crane Operator Candidate Manual opens it to IUOE members in good standing who have 1,000 documented hours of crane-related experience or training, a current medical card and a negative drug test.
OECP certification: requirements, exams and fees. If your training center tests for CCO instead, the subject matter is the same. OECP and NCCCO compared.
FAQ
Guide
The operating engineers union: who it represents, its locals and its crane card.
IUOEGuide
Hours, requirements, the entrance test and pay at three IUOE locals.
Operating engineers apprenticeshipGuide
What operating engineers locals test before the apprenticeship.
IUOE aptitude test25 questions. No sign-up. Every answer explained.