1. Home
  2. Union heavy equipment operator

Union route

Union heavy equipment operator: how to get in

Union heavy equipment operators belong to the International Union of Operating Engineers. The way in is a local's apprenticeship. The programs look alike from a distance and differ in the details, so here they are side by side.

The short answer

You become a union heavy equipment operator through an IUOE local's apprenticeship. Most programs we checked run about four years and 6,000 hours on the job, and you are paid while you train. Entry usually takes age 18, a diploma or GED, a driver's license, a drug test and an entrance test.

Each row below links to that local's page, where every figure is sourced. Checked November 2026 against the BLS Occupational Outlook Handbook, Construction Equipment Operators and the IUOE union FAQs.

Heavy equipment apprenticeship hours, local by local

These are each program's own published figures. A blank is not a zero: it means the source we checked did not say.

IUOE heavy equipment operator apprenticeships
LocalWhereHours on the jobClassroom or related training
Local 150Illinois6,000 or more240 or more classroom hours and 192 or more of field instruction
Local 12Southern California6,000Six semesters, about two or three Saturdays a month
Local 49Minnesota6,000432 hours
Local 139Wisconsin6,000, in four levels of 1,500Off-season courses, typically three weeks
Local 324Michigan6,000, over at least three yearsNot stated
Local 478Connecticut6,000, over four yearsNot stated
Local 15New York City6,000, over four yearsNot stated
Local 3Northern Nevada6,000 for Grading and PavingNot stated
Local 3Hawaii6,000520 hours
Local 4Eastern Massachusetts, New Hampshire, Maine8,000600 hours
Local 66Western Pennsylvania4,000 minimum, over at least four yearsFive to seven weeks a year
Local 18OhioNot stated640 hours at the training site

Sources: the page for each local, which links to the local's own publication.

Local 302 and Local 825 have pages too. Their sources give application rules and pay, but not program hours.

What it takes to get in

The lists overlap heavily. Across the locals we checked you will see:

  • Age 18. Local 12 lets you apply at 17 and a half. Local 18 wants you 18 by May 1 of the application year.
  • A diploma or GED. The Washington program for Locals 302 and 612 accepts two years of equipment experience instead, with passing math and reading assessments.
  • A driver's license. Local 18 adds a Class B CDL permit with air brakes in your first year.
  • Residency. Local 150, Local 66 and Local 825's New York recruitment all require you to live in the territory.
  • A drug test, and often a DOT physical.
  • An entrance test. What IUOE aptitude tests cover.

Local 101 is the outlier: it asks for an OSHA 10 Construction card before you apply. See Local 101.

Free OECP practice test

25 questions, no sign-up, every answer explained.

Start now

Pay while you train

Apprentices are paid for hours on the job, at a share of the journey-level rate that rises as hours build. Published starting points run from 50% at Local 150 to 60% at Local 12 and 65% at the Washington program for Locals 302 and 612.

Nationally, BLS reports a median of $59,850 a year for operating engineers and other construction equipment operators. Operating engineer salary in detail.

From heavy equipment to cranes

Most crane operators start on other equipment. BLS says crane and tower operators typically have several years of experience as construction equipment operators, hoist and winch operators, or riggers and signalers.

Some programs let you aim at cranes from the start. Local 3's Northern Nevada program has a Crane Operator branch, and the Washington program lists Hoisting Engineer as its own trade. Either way, running a crane on a construction site takes certification. How to become a union crane operator.

FAQ

Union heavy equipment operator questions

How do I become a union heavy equipment operator?
Apply to the apprenticeship run by the IUOE local that covers where you live, pass its entrance test and selection, then work and train for about four years.
How long is a heavy equipment operator apprenticeship?
Most of the IUOE programs we checked are 6,000 hours on the job over about four years. Local 4 lists 8,000 hours, and Local 66 lists a minimum of four years and 4,000 hours.
Do union heavy equipment apprentices get paid?
Yes. Apprentices are paid for hours worked, starting at a share of the journey-level rate. Published starting shares include 50% at Local 150, 60% at Local 12 and 65% in the Washington program for Locals 302 and 612.
What union are heavy equipment operators in?
The International Union of Operating Engineers, the IUOE.
Do I need experience to get into the apprenticeship?
Usually not. Local 12 says no prior experience is required, and Local 139 describes its program as for operators with little to no experience.

Keep going

Guide

IUOE

The operating engineers union: who it represents, its locals and its crane card.

IUOE

One free practice test shows you where you stand.

25 questions. No sign-up. Every answer explained.

Start the free practice test
Free OECP practice test25 questions, no sign-up
Start now