1. Home
  2. Lattice boom crane

Crane types

Lattice boom cranes

A lattice boom is built from pinned sections of chords and lacings, held up by a boom hoist rope and pendants. It is light for its length, which is why the biggest crawler cranes use one. It also has to be assembled, and that changes the rules.

The short answer

A lattice boom crane has a fixed-length boom of bolted or pinned sections, raised and lowered by a wire rope boom hoist. OSHA requires boom stops on it, a boom hoist limiting device and, on cranes built after February 28, 1992, an anti-two-block device. Lattice boom is one of the three mobile crane types OECP certifies, with its own practical exam.

Checked November 2026 against the text of 29 CFR 1926.1415, 29 CFR 1926.1416, 29 CFR 1926.1414, 29 CFR 1926.1401 and the OECP Crane Operator Candidate Manual.

Lattice boom or telescopic boom

How OSHA's rules treat the two boom types
Lattice boom<a href="/telescopic-boom-crane">Telescopic boom</a>
BoomPinned sections, changed by assemblySections that extend and retract hydraulically
Boom stopsRequired safety deviceNot required on hydraulic booms
Boom length indicatorNot on OSHA's list for fixed-length boomsRequired operational aid
Anti-two-block, built after February 28, 1992Must warn or preventMust automatically prevent
Anti-two-block, built after November 8, 2011Must automatically preventMust automatically prevent
Getting it readyAssembly under an A/D directorSet up and extend

Sources: 29 CFR 1926.1415 and 29 CFR 1926.1416.

8 practice questions on lattice boom cranes

Pick an answer to see whether you are right and why. These are original practice questions from the Crane Exam Prep question bank, not actual exam questions.

  1. Lattice Boom — General

    1. On a lattice boom crane, what are "pendants"?

    Show answer

    Answer: B. Fixed-length wire ropes or bars that support the boom between the boom top and the live boom hoist reeving. Pendants are standing (fixed-length) supporting ropes or bars in the boom suspension system of a lattice crane.

  2. Crane Types

    2. Which statement about a crawler crane is TRUE?

    Show answer

    Answer: C. It lifts and travels with a load from its tracks — it has no outriggers at all. A crawler's track base is its lifting base; there are no outriggers to set, so it can lift and travel (pick-and-carry) with a load per the chart. Wheeled cranes can also pick-and-carry on rubber, but only at reduced on-rubber ratings.

  3. Mobile Crane Essentials

    3. What effect do extended crawlers have on a lattice crawler crane's capacity?

    Show answer

    Answer: A. They increase capacities when working over the side. Extended crawlers increase capacities when working over the side by widening the base of stability.

  4. ASME B30.5 (Mobile Cranes)

    4. According to ASME B30.5, any new poured socket or swaged socket assembly used as a boom pendant shall be proof tested to the manufacturer's recommendation but in no case greater than:

    Show answer

    Answer: B. 50% of the nominal strength of the component rope or structural strand. Para 5-1.7.3(c) caps proof testing at 50% of the nominal strength of the component wire rope or structural strand.

  5. Technical Knowledge

    5. When a lattice boom is under load, what can happen if the boom makes contact with the load or rests on a ledge?

    Show answer

    Answer: B. boom collapses. If the boom contacts the load or rests on an obstruction, it is loaded in ways it was never designed for and can buckle and collapse.

  6. Lattice Boom — General

    6. While raising a long lattice boom off the ground during assembly, the greatest compression and highest risk of buckling occurs:

    Show answer

    Answer: A. at the lowest boom angles, when the boom is nearly horizontal. Near horizontal the boom's own weight acts at the longest lever arm and puts maximum compression in the chords, so the lowest angles during raising are the most critical.

  7. Crane Types

    7. On a crawler crane, ground bearing pressure is greatest…

    Show answer

    Answer: B. Over the corner. Working over a track corner concentrates the most pressure into the ground.

  8. Lattice Boom — General

    8. The A-frame structure that raises to improve pendant and boom-hoist reeving angles is the:

    Show answer

    Answer: A. gantry (or mast). The gantry (live mast/A-frame) raises the pendant and boom-hoist attachment point, reducing boom compression and suspension loads.

Free OECP practice test

25 questions, no sign-up, every answer explained.

Start now

Rules that matter most on a lattice boom

From 29 CFR 1926 Subpart CC
PendantsOSHA defines them as the rope or bar suspension members in a latticed boom system. Standing ropes and pendants come out of service at more than two broken wires in one rope lay beyond the end connections, or more than one at an end connection
Boom hoist ropeFiber core rope is not allowed for boom hoist reeving, except on derricks
Rotation resistant rope on the boom hoistOnly under set conditions, including a drum and sheave pitch diameter of at least 18 times the rope diameter and an operating design factor of at least 5
Boom hoist limiting deviceRequired on equipment built after December 16, 1969. A Category I operational aid
Assembly and disassemblyDirected by an A/D director. Rigging by a qualified rigger
Post-assembly inspectionBy a qualified person, to confirm the crane is configured as the manufacturer specifies
Boom free fallProhibited in the situations OSHA lists, such as when an employee is in the fall zone or personnel are being hoisted

Sources: 29 CFR 1926.1401, 29 CFR 1926.1413, 29 CFR 1926.1414, 29 CFR 1926.1416, 29 CFR 1926.1404, 29 CFR 1926.1412 and 29 CFR 1926.1426.

The A/D director's job and wire rope inspection are both worth reading next.

OECP lattice boom certification

OECP certifies lattice boom as one of three mobile crane types, with boom truck and telescopic boom. All three share one written exam: 75 questions in two hours, no calculators. You then take the practical on a lattice boom crane to put that type on your card.

The lattice boom crane operator program is accredited by the National Commission for Certifying Agencies through November 30, 2029. The manual's sample load chart for mobile cranes is a Manitowoc 222, a lattice boom crawler, so expect to read a lattice chart.

Take the free mobile crane practice test, then practice reading a load chart.

FAQ

Lattice boom crane questions

What is a lattice boom crane?
A crane whose boom is built from sections of steel chords and lacings pinned or bolted together, raised and lowered by a wire rope boom hoist and pendants.
What is the difference between a lattice boom and a telescopic boom?
A lattice boom has a fixed length that is changed by adding or removing sections. A telescopic boom extends and retracts hydraulically. Lattice booms are lighter for their length.
Are boom stops required on a lattice boom crane?
Yes. Boom stops are a required safety device under OSHA 1926.1415, with an exception only for hydraulic booms. The crane cannot operate if they are not working.
Is there an OECP lattice boom certification?
Yes. Lattice boom is one of the three mobile crane types OECP certifies. It shares the mobile crane written exam and has its own practical.
What are pendants on a crane?
OSHA defines pendants as the rope or bar suspension members in a latticed boom system. They carry the boom's load between the boom tip and the boom hoist reeving.
Are these real exam questions?
No. They are original practice questions written from the OSHA rules and ASME B30 standards that crane exams draw on. OECP does not release its questions, and this site is not affiliated with OECP or the IUOE.

Keep going

One free practice test shows you where you stand.

25 questions. No sign-up. Every answer explained.

Start the free practice test
More practice questionsFree account, no card
Open the app