1. Home
  2. Boom truck operator certification

Crane types

Boom truck operator certification

A boom truck is a crane on a commercial truck chassis. On a construction site it falls under the same OSHA operator rule as a 300-ton crawler, which surprises people who think of it as a delivery truck.

The short answer

Yes, boom truck operators need certification on construction sites. OSHA's operator rule covers them unless the crane is rated at 2,000 pounds or less. OECP certifies boom truck as its own crane type. You take the same 75-question mobile crane written as lattice and telescopic boom candidates, then a practical on a boom truck.

Checked November 2026 against the text of 29 CFR 1926.1427, 29 CFR 1926.1400, the OECP Crane Operator Candidate Manual and the NCCCO Foundation directory of accredited certification programs, June 29, 2026.

What OSHA requires

Boom trucks under 29 CFR 1926 Subpart CC
Covered?Yes. The rule covers power-operated equipment that can hoist, lower and horizontally move a suspended load
OperatorTrained, certified or licensed, and evaluated by the employer
Certified byCrane type, or type and capacity
Small cranesEquipment rated at 2,000 pounds or less is excepted from certification. The operator must still be trained
Material deliveryThe rule has a narrow exclusion for some articulating, knuckle-boom truck cranes that are delivering material
Who paysThe employer provides required certification at no cost to the employee

Sources: 29 CFR 1926.1400, 29 CFR 1926.1427 and 29 CFR 1926.1441.

8 practice questions on boom trucks and truck cranes

Pick an answer to see whether you are right and why. These are original practice questions from the Crane Exam Prep question bank, not actual exam questions.

  1. Crane Types

    1. Of the quadrants that carry a rating on a truck crane's work-area chart, the LOWEST capacities are usually:

    Show answer

    Answer: D. Over the side. Over the rear the carrier's engine and front end act as counterweight; over the side the carrier's mass sits close to the tipping axis through the two outrigger pads on that side, so side ratings are usually the lowest of the rated quadrants. Always confirm on the work-area chart.

  2. ASME B30.5 (Mobile Cranes)

    2. According to ASME B30.5, with a wheel-mounted crane's superstructure at 90 deg to the carrier, the total load on all wheels on the side under the boom shall not be less than:

    Show answer

    Answer: A. 15% of the total weight of the crane. Para 5-1.2.2(c)(1) requires at least 15% of total crane weight on the wheels under the boom side for backward stability.

  3. Crane Types

    3. Compared to truck mounted cranes, all terrain cranes usually have…

    Show answer

    Answer: D. Fewer axles, larger tires, and lower speeds, but are still highway capable. All terrain cranes generally have fewer axles, larger tires, and lower speeds than truck cranes, yet remain capable of highway travel.

  4. ASME B30.5 (Mobile Cranes)

    4. According to ASME B30.5, a commercial truck-mounted crane with outriggers extended and set may be rated at:

    Show answer

    Answer: D. 85% of the tipping load. Table 5-1.1.1-1 lists 85% for commercial truck vehicle mounted cranes with outriggers extended and set.

  5. ASME B30.5 (Mobile Cranes)

    5. According to ASME B30.5, a wheel-mounted crane lifting without outrigger support (on tires) is limited to what percentage of tipping load?

    Show answer

    Answer: D. 75%. Table 5-1.1.1-1 gives 75% for wheel-mounted cranes without outrigger support.

  6. Mobile Crane Essentials

    6. What happens when an unlevel crane swings the boom?

    Show answer

    Answer: A. The swing radius increases. When swinging an unlevel crane, an increase in swing radius results, which increases load moment.

  7. Crane Types

    7. On a truck-mounted crane, the lower carrier cab is used for:

    Show answer

    Answer: C. Driving the crane over the road between jobs. The carrier (lower) cab is for road travel; lifting functions are controlled from the upper cab that rotates with the superstructure.

  8. Mobile Crane Essentials

    8. What is meant by a mobile crane's "quadrant of operation"?

    Show answer

    Answer: C. The working area relative to the carrier (over front, over rear, or over side) for which chart capacities may differ. Capacities can differ over the front, rear, or sides of the carrier; charts define these quadrants and their ratings.

Free OECP practice test

25 questions, no sign-up, every answer explained.

Start now

The OECP boom truck card

OECP boom truck operator
Who can applyIUOE members in good standing
Hours1,000 documented hours of crane-related experience or training in the past five years
Written examThe mobile crane written: 75 questions, two hours, no calculators. It is shared with lattice boom and telescopic boom
Practical examOn a boom truck: hand signals, ball in barrels, a start and stop circle, an S-shaped corridor forward and in reverse, and shutdown
Passing500 on the written's 200 to 800 scale. 70 of 100 points on the practical
Card lengthFive years
AccreditationThe boom truck operator program is accredited by NCCA through November 30, 2029

Sources: OECP Crane Operator Candidate Manual and the NCCCO Foundation directory of accredited certification programs, June 29, 2026.

Because the written is shared, passing it once opens the practical for the other mobile types too. Each extra type is one more practical. What that costs.

What to study

Boom truck questions lean on setup and work area, because the truck is part of the crane:

Then take the free mobile crane practice test.

FAQ

Boom truck certification questions

Do you need a certification to operate a boom truck?
On a construction site, yes. OSHA requires the operator to be trained, certified or licensed, and evaluated, unless the crane is rated at 2,000 pounds or less.
Does OECP have a boom truck certification?
Yes. Boom truck is one of the three mobile crane types OECP certifies, and its operator program is accredited by NCCA.
Is the boom truck written exam different from the mobile crane exam?
No. Boom truck candidates take the OECP mobile crane written, the same exam as lattice boom and telescopic boom candidates. The practical is on a boom truck.
Does a 2,000 pound crane need a certified operator?
No. Equipment with a rated hoisting capacity of 2,000 pounds or less is excepted from OSHA's certification requirement. Its operator must still be trained.
How long does a boom truck certification last?
Five years, for both OECP cards and OSHA's rule.
Are these real exam questions?
No. They are original practice questions written from the OSHA rules and ASME B30 standards that crane exams draw on. OECP does not release its questions, and this site is not affiliated with OECP or the IUOE.

Keep going

One free practice test shows you where you stand.

25 questions. No sign-up. Every answer explained.

Start the free practice test
More practice questionsFree account, no card
Open the app