1. Home
  2. Crane terminology

Glossary

Crane terminology: a glossary for operators

Exam questions turn on exact words. A competent person is not a qualified person, and an indicator is not a limiter. These are the terms worth knowing, with the meaning OSHA's crane rule gives them.

The short answer

Most crane exam vocabulary comes from 29 CFR 1926.1401, the definitions section of OSHA's crane rule. The pairs that get mixed up most: competent person and qualified person, indicator and limiter, safety device and operational aid, and rated capacity and what the crane can physically lift.

Checked November 2026 against the text of 29 CFR 1926.1401.

Crane terms and what they mean

Definitions summarized from 29 CFR 1926.1401
TermMeaning
A/D directorThe person who meets the rule's requirements for directing assembly and disassembly, whatever their job title
Assist craneA crane used to help assemble or disassemble another crane
BoomThe inclined structural member that supports the upper hoisting tackle. On a tower crane a fixed working boom is called a jib
Competent personSomeone who can identify existing and predictable hazards and has the authority to take prompt corrective measures
Controlling entityThe prime or general contractor, or another entity with overall responsibility for the project
Dedicated spotterA person who meets the signal person qualifications and whose sole job is watching the clearance to a power line
Fall zoneThe area in which it is foreseeable that suspended materials could fall
HoistA mechanical device that lifts and lowers a load by winding line onto or off a drum
Load moment indicatorA device that senses the overturning moment, load times radius, compares it with rated capacity and shows the share of capacity in use
Load moment limiterThe same sensing, but it shuts off the functions that would increase loading once rated capacity is reached
Operational aidA device that gives the operator information or automatically takes control of a crane function
PendantsThe rope or bar suspension members in a latticed boom system
Qualified personSomeone with a recognized degree, certificate or professional standing, or extensive knowledge, training and experience, who has shown the ability to solve problems in the subject
Qualified riggerA rigger who meets the criteria for a qualified person
Range control warning deviceA device the operator sets to warn when the boom or jib tip reaches a chosen plane
Rated capacityThe maximum working load the manufacturer permits under specified working conditions
TaglineA rope attached to a load to control its spinning and swinging
Two-blockingContact between the uppermost component on the hoist line and the boom tip or fixed upper block
UpperworksThe revolving frame that carries the operating machinery and cab, with the counterweight at the rear and the boom at the front
Wire ropeA flexible rope made of steel wires laid helically around a core

Source: 29 CFR 1926.1401.

5 practice questions on crane terms

Pick an answer to see whether you are right and why. These are original practice questions from the Crane Exam Prep question bank, not actual exam questions.

  1. Definitions

    1. Weights added to a crane superstructure to create stability or counter the lifted load, which rotate with the crane as it swings, are called:

    Show answer

    Answer: B. Counterweight. Counterweight is added to the superstructure and rotates with the crane; ballast is added to the base and does not rotate.

  2. Definitions

    2. What is a wire rope's minimum breaking strength (MBS)?

    Show answer

    Answer: A. The weight at which the rope is designed to fail. MBS is the weight at which a rope is designed to fail; permissible line pull equals MBS divided by the design factor.

  3. Definitions

    3. Crane inspections shall be carried out by a designated person, which is defined as:

    Show answer

    Answer: A. A person selected or assigned by the employer or employer's representative as competent to perform specific duties. A designated person is one selected or assigned by the employer or the employer's representative as being competent to perform specific duties.

  4. Definitions

    4. 'Dynamic loading' refers to loads introduced into the crane by…

    Show answer

    Answer: D. Accelerating or decelerating forces. Dynamic loading comes from accelerating or decelerating the load or crane functions, adding force beyond the static weight.

  5. General Knowledge

    5. The term that is used to define the load plus all rigging components, hooks, blocks, and other lifting equipment is:

    Show answer

    Answer: A. gross load. The gross load is the load itself plus all rigging, hooks, blocks, and other lifting equipment.

Free OECP practice test

25 questions, no sign-up, every answer explained.

Start now

Six more terms from elsewhere in the rule

Terms defined by how the rule uses them
TermMeaningWhere
Safety deviceA device the crane cannot operate without, such as a level indicator, boom stops or a horn. No alternative measures1926.1415
Category I and Category IIThe two classes of operational aid, with repair deadlines of 7 and 30 calendar days1926.1416
Standard MethodOSHA's set of 19 hand signalsAppendix A
Table AThe minimum power line clearances by voltage1926.1408
Lift directorThe person who directs a lift, required by name for multiple-crane lifts1926.1432
Operator-in-trainingAn uncertified person operating under continuous monitoring by a trainer1926.1427

The pairs that get confused

  • Competent or qualified. Competent is about spotting hazards and having the authority to fix them. Qualified is about knowledge and the proven ability to solve the problem. A shift inspection takes a competent person. An annual inspection takes a qualified person. An A/D director has to be both, or be a competent person with qualified help.
  • Indicator or limiter. An indicator tells you. A limiter stops you.
  • Safety device or operational aid. A failed safety device stops the crane. A failed operational aid starts a repair clock and a temporary measure.
  • Standing rope or running rope. Running rope moves over sheaves and drums. Standing rope, such as pendants, does not. The broken-wire limits differ. Wire rope inspection.

FAQ

Crane terminology questions

What is the difference between a competent person and a qualified person?
A competent person can identify existing and predictable hazards and has the authority to correct them promptly. A qualified person has a recognized degree, certificate or professional standing, or extensive knowledge, training and experience, and has shown the ability to solve problems in the subject.
What does rated capacity mean?
The maximum working load the manufacturer permits under specified working conditions, such as a given boom length, radius and setup.
What is the fall zone?
The area in which it is foreseeable that partially or completely suspended materials could fall in the event of an accident.
What is the upperworks of a crane?
The revolving frame that carries the operating machinery and the cab, with the counterweight at the rear and the boom at the front.
What is a tagline?
A rope attached to a lifted load to control its spinning and swinging.
Are these real exam questions?
No. They are original practice questions written from the OSHA rules and ASME B30 standards that crane exams draw on. OECP does not release its questions, and this site is not affiliated with OECP or the IUOE.

Keep going

One free practice test shows you where you stand.

25 questions. No sign-up. Every answer explained.

Start the free practice test
More practice questionsFree account, no card
Open the app