1. Home
  2. Rigger certification

Rigging

Rigger certification: what is required and which card

OSHA does not require riggers to be certified. It requires them to be qualified, and leaves the employer to decide who is. A certification card is the usual way to prove it. Here are the two cards crane crews carry.

The short answer

OSHA requires a qualified rigger for crane assembly and disassembly and whenever workers are in the fall zone handling a load. Certification is not required by OSHA. For IUOE members, OECP offers one combined Signal Person Rigger card: a 110-question written and a four-part practical. CCO offers Rigger Level I and Level II as separate certifications.

Checked November 2026 against the OSHA fact sheet: Qualified Rigger, the OECP Signal Person Rigger Candidate Manual (2025 edition) and CCO exam details as published on our sister site, ccoexamprep.com.

What OSHA requires

OSHA's construction crane rule calls for a qualified rigger in two places:

  • Rigging work during crane assembly and disassembly, under 1926.1404(r)
  • When workers are in the fall zone to hook, unhook or guide a load, or to make the first connection of a load to a structure, under 1926.1425(c)

A qualified rigger is a rigger who meets the definition of a qualified person: a recognized degree, certificate or professional standing, or extensive knowledge, training and experience, with a proven ability to solve rigging problems.

OSHA's fact sheet says a rigger does not have to be certified by an accredited organization or assessed by a third party. The employer makes the call, load by load. More on what qualified means, with a 15-question rigger test.

OECP and CCO rigger cards compared

Rigger certification programs
OECP Signal Person RiggerCCO Rigger Level ICCO Rigger Level II
Who can take itIUOE membersOpen to the publicOpen to the public
CoversRigging and signaling togetherRoutine rigging, with load weight and center of gravity givenNon-routine rigging, working out weight and center of gravity yourself
Written exam110 questions, 2 hours60 questions, 60 minutes50 questions, 60 minutes
Practical examFour tests: hand signals, radio signals, rigging inspection and a rigging practicalFour tasks, 60 minutesHands-on
Before you test500 hours and an IUOE-recognized training certificateLevel I must be current
Card lengthFive yearsFive yearsFive years

Sources: OECP Signal Person Rigger Candidate Manual for OECP. CCO details are as published on ccoexamprep.com, our sister site, from CCO's own handbooks.

The OECP card does both jobs at once: 40% of its written is signaling. The signaling side.

Free OECP practice test

25 questions, no sign-up, every answer explained.

Start now

8 practice questions on rigging

Pick an answer to see whether you are right and why. These are original practice questions from the Crane Exam Prep question bank, not actual exam questions.

  1. Rigging

    1. What is the center of gravity of an object?

    Show answer

    Answer: D. The point at which the object will balance, where its entire weight may be considered concentrated. The center of gravity is the point at which the object will balance — the entire weight may be considered as concentrated at this point.

  2. Rigging 1

    2. When using a basket hitch, the load must be:

    Show answer

    Answer: C. Balanced to prevent slipping. Basket hitches must have loads balanced to prevent the load from slipping out of the hitch.

  3. Rigging 2

    3. Using 40 lb per square foot per inch of thickness, what does a steel plate 10 ft x 5 ft x 2 in thick weigh?

    Show answer

    Answer: D. 4,000 lb. Area = 10 x 5 = 50 sq ft; 50 x 40 x 2 in = 4,000 lb.

  4. Rigging

    4. How can shock loading of rigging equipment be prevented?

    Show answer

    Answer: A. by applying loads to rigging equipment more slowly when lifting. Shock loading comes from sudden application of force; taking up slack and lifting slowly and smoothly lets the rigging load gradually, avoiding dynamic force spikes.

  5. Rigging 1

    5. Which environment prohibits the use of a nylon web sling?

    Show answer

    Answer: D. Fumes or liquids of acids or phenolics. Nylon web slings must not be used around acids or phenolics; polyester and polypropylene web slings must not be used around caustics.

  6. Rigging

    6. A SYNTHETIC sling eye must never be placed over a fitting whose diameter or width is greater than what?

    Show answer

    Answer: A. One third the length of the eye. Synthetic sling eyes are limited to one third of the eye length, stricter than the one half allowed for wire rope, because webbing and roundsling covers distort and bunch far more readily.

  7. Rigging 1

    7. Nylon web slings have approximately what stretch factor at rated load compared with polyester?

    Show answer

    Answer: D. About 10 percent, which is higher than polyester. Nylon's elongation absorbs shock but eats headroom and makes precise placement difficult. Polyester stretches noticeably less, which is why it is preferred in tight headroom and for controlled setting.

  8. Rigging

    8. A wire rope sling with wire rope clips attached must not be used in which hitch?

    Show answer

    Answer: D. Choker hitch. Slings with wire rope clips attached should never be used in a choker hitch.

Inside the OECP Signal Person Rigger written

Written exam domains
DomainShare
Rigging standards20%
Rigging operations30%
Rigging calculations10%
Signaling40%

Source: OECP Signal Person Rigger Candidate Manual.

Passing is 500 on a scale of 200 to 800. The practical is worth 350 points and 261 passes. Personal calculators are not allowed. Take the free Signal Person Rigger practice test.

What a rigger has to know

FAQ

Rigger certification questions

Does OSHA require rigger certification?
No. OSHA requires riggers to be qualified for certain work, and its fact sheet says they do not have to be certified by an accredited organization or assessed by a third party.
How do I get rigger certification?
Through a certification body. IUOE members can take the OECP Signal Person Rigger exams, which need 500 hours and an IUOE-recognized training certificate. CCO's Rigger Level I is open to the public.
What is the difference between Rigger Level I and Level II?
CCO's Level I covers routine rigging where the load weight and center of gravity are given. Level II covers non-routine rigging where the rigger works those out, and it requires Level I to be current.
How long does rigger certification last?
Five years for the OECP Signal Person Rigger card and for CCO rigger certifications.
Does OECP have a separate rigger card?
No. OECP certifies rigging and signaling together as Signal Person Rigger, with one 110-question written exam and a four-part practical.
Are these real exam questions?
No. They are original practice questions written from the OSHA rules and ASME B30 standards that crane exams draw on. OECP does not release its questions, and this site is not affiliated with OECP or the IUOE.

Keep going

One free practice test shows you where you stand.

25 questions. No sign-up. Every answer explained.

Start the free practice test
More practice questionsFree account, no card
Open the app